Quality Scania parts available at West Fleet Care

Imagine you’re deep in the Pilbara and your Scania mining truck just quit. Dust, steep grades and baking heat push parts to their limits. One failed component and your whole operation is stopped, costing you tens of thousands per day in downtime.

The solution? Genuine Scania parts and expert service in Perth, WA.

West Fleet Care is Perth’s trusted Scania mining specialist. We supply authentic Scania parts straight to your site from Scania Australia.

In this guide you’ll discover why Scania parts need to be genuine. We’ll mention the top Scania spares to keep on hand. Also, you’ll explore how our mobile service and warranty programs save you time and money.

Let dig in.

Why Choose Genuine Scania Parts in Perth?

Cheap aftermarket parts might fit now, but they fail sooner.

Scania Australia experts warn there’s no logical, coherent case to buy the cheapest non-genuine part. Aftermarket knock-offs simply can’t match a genuine Scania part in material quality or durability. In harsh WA mining conditions, because of dust storms, heavy loads, and extreme temperatures parts quickly lead to breakdowns.

Using OEM Scania parts means:

• Perfect Fit & Performance: Made to Scania’s exact specs. Genuine parts install seamlessly and keep your engine, brakes and hydraulics running smoothly.
• Safety & Reliability: Factory-tested for heavy-duty use. Staying genuine avoids leaks, cracks and overheating that often plague aftermarket parts.
• Full Warranty Protection: All genuine Scania components come with a 24-month OEM warranty when installed by certified technicians. You get serial-number tracking and support from Scania Australia if anything goes wrong.
• Built for WA Conditions: Our Scania parts are designed for tough environments. They resist corrosion from Pilbara dust and tolerate high heat, so you get maximum uptime.
• Long-Term Value: Yes, genuine parts cost more upfront, but they last longer. Saving a few dollars on cheap parts means far more lost when they fail and strand you.

For complete peace of mind, schedule full Scania diagnosis and programming before and after each service. This ensures new parts integrate perfectly with your truck’s electronics. Our experts use Scania’s diagnostic tools to catch any hidden faults, keeping your entire Scania fleet running like new.

Top 10 Essential Scania Parts for Mining Trucks in WA

In a mining rig, some parts wear out faster than others. Keep these 10 critical Scania components on hand to avoid costly downtime:

1. Brake Air Compressor

Brake air compressor supplies compressed air for the brakes. In high-dust WA, moisture build-up corrodes the pump and wears out diaphragms, leading to leaks or loss of braking power. Replace per your service schedule which is typically every 5,000–10,000 hours. Carry spares to avoid a no-brake emergency.

2. Cabin Tilt Pump

This powers the hydraulic lift for tilting the cab. Its seals and hoses can degrade, causing leaks. A failed pump leaves the cab locked down during maintenance. Inspect seals regularly and swap it out every 5,000+ hours to prevent service delays.

3. Cab Mounts & Bushings

Cab mounts and bushings isolate cab vibrations. Constant rough terrain causes rubber mounts to crack or crumble, making rides rough and unsafe. We replace worn mounts every 2–3 years or as soon as any crack appears to maintain operator safety.

4. Suspension Components

Air springs, springs and shock absorbers absorb the load. Over time, airbags can leak and shocks wear out, causing bottoming out and instability. A sagging or bouncy suspension should prompt component replacement usually, every 2–4 years, to keep handling precise.

5. Water Pump & Gasket

Circulates engine coolant. Debris and high loads cause seal or pump failure, leading to coolant leaks and engine overheating. We recommend replacing the pump and gasket at major services, usually every 4+ years to prevent blowouts in the bush.

6. Frame Components

Crossmembers, brackets and chassis rails hold the truck together. Heavy loads, corrosion and fatigue can cause cracks or rust which weakens the frame. Annual inspections are critical. Crack or rust spots need immediate weld repairs or part replacement to avoid catastrophic failure.

7. Tyres & Wheels

Wheels support weight and maintain traction. Rough mines produce worn tread, cuts, or imbalance in tyres. Check tyres before each shift; replace tyres once tread is unsafe, mostly every 20,000–30,000 km in mining. Wheel bearings and hubs should be inspected and serviced per the maintenance schedule to prevent sudden failures.

8. Brake Drums & Hubs

Transmit torque from brakes to wheels. Warped drums or hubs heat up under hard braking which reduces stopping power and causes brake fade. We typically reinspect drums every 50,000 km. Severe scoring or warping means replacement. Hubs get repacked or replaced on a similar timeline to maintain safety.

9. Mudguard Straps

Small but important. Mudguard straps hold mudguards in place. Old rubber straps can snap under vibration, sending guards flying and risking fines. We check straps at every inspection and replace them if any cracking shows, as it’s a quick fix that prevents bigger headaches on the road.

10. AC Compressor

AC compressor powers the cab air conditioning. Failing in high-heat conditions leaves drivers sweltering. Dust can clog valves or oil passages. We service the AC annually and swap the compressor every few years to keep climate control effective and comfortable.

Here’s a summary table of these parts with typical failure modes and suggested replacement intervals:

Comprehensive Scania Truck System Servicing

At West Fleet Care, we can rebuild any system on your Scania with genuine parts and expert care. We offer complete servicing for:

• Braking System – New OEM brake pads, discs, drums, chambers and valves, fitted with leak testing and calibration. We also handle air compressors, control valves and ABS/EBS modules to keep stopping power 100%.
• Steering & Suspension – New Scania bushings, tie-rods, knuckles, plus air suspension bags and shocks. We perform on-site wheel alignments and adjust for load to ensure smooth, responsive handling.
• Cooling & Gaskets – Replacement water pumps, thermostats, hoses and gaskets. We fix leaks, flush the system and bleed coolant to prevent overheating in WA’s heat.
• Frame & Body – OEM chassis brackets, cross-members and body mounts. We do stress-relief welds and corrosion treatment to keep your truck rigid and safe.
• Tyres, Wheels & Hubs – Hub overhauls, bearing replacements and torque-balancing. We also supply and fit premium tyres for heavy loads, ensuring traction and longevity.
• Electrical System – Full diagnostics and ECU programming. We install genuine alternators, starters, ECUs, sensors and wiring looms as needed, so your truck’s electronics are factory-calibrated.

No matter the system, every installation is done by certified Scania experts using Scania-approved procedures. We test components under load and reprogram control units if required.

Scania Parts Warranty Perth & Cost-Saving Core Exchanges

When you buy Scania parts from us, you get more than just hardware. You get full manufacturer support and savings:

• Serial-Number Tracking

Every part we supply is tagged and logged. This ensures authenticity and allows full warranty support from Scania.

• Full OEM Warranty

All genuine Scania parts come with a 24‑month warranty when installed by our team. Any defect in the part or workmanship during this period is covered under the Scania warranty.

• Core-Exchange Savings – Up to 30% Off

Many high-cost parts (turbochargers, alternators, etc.) can be bought on a core-exchange basis. Return your old core in rebuildable condition and save up to 30% off the new part price. This is a smart way to get a factory-grade component at a fraction of the cost.

Where to Buy Scania Parts in Perth?

West Fleet Care is your #1 source for Scania parts in Perth

We’re proud to be Perth’s leading Scania parts supplier and mobile service. We carry a large inventory of genuine Scania components, from engine and brake parts to electronics and body panels.

As WA’s Scania mining specialists, we’ve been keeping rigs running for years. Our mobile workshops are fully equipped with factory Scania diagnostic tools and spares. Every replacement part we supply is direct from the manufacturer. No shortcuts. That means when you order from us, you get factory-tuned parts that ensure maximum uptime and safety.

How Our Scania Parts Mobile Service in Perth Works

Need parts fast? Our 4-step mobile service streamlines everything:

1. Order Parts. We stock genuine Scania parts from Scania Australia, so you’re dealing directly with factory-spec components. Call us at 0423 858 801 or place an order on our website.
2. On-Site Fitment. Our Scania-trained technicians drive to your location and install the part. We follow Scania’s precise fitting procedures, calibrating and testing as needed so your truck runs like new.
3. Digital Sign-off & Traceability. After fitting, we do a digital sign-off and log the part’s serial number. This completes your 24-month warranty registration and keeps full traceability for peace of mind.

Tired of breakdowns eating into your profits? Need quality parts for Scania trucks?

Raech Out West Fleet Care – Buy Quality Scania Parts in Perth & Reduce Downtime

Getting the right part fast means more uptime, safety and savings. West Fleet Care provides genuine Scania parts with complete warranty backing and local Scania expertise.

Don’t risk cheap imitations. Get the real deal and the professional fitment that comes with it.

Order Scania Parts Online Now

Explore Our Mining Truck Maintenance Services

FAQs About Scania Parts in WA

Q1: What is the warranty on Scania parts?

All genuine Scania OE parts come with a 24-month warranty when fitted by our certified technicians. This covers any manufacturing defects for two full years, giving you confidence in quality and peace of mind.

Q2: Do you stock parts for all Scania R-series & S-series trucks?

Yes. West Fleet Care carries a comprehensive range of parts for both R-series and S-series Scania models. From engines and transmissions to brakes and body panels, if it’s genuine Scania, we can supply it, either from our warehouse or on immediate order.

Q3: Are Scania engines reliable?

Absolutely. Scania engines are famous for their durability, power and fuel efficiency. Built for heavy loads and long hours, they offer one of the best power-to-weight ratios in the industry. In mining and transport, Scania engines keep working through tough conditions, so your operation stays efficient.

Q4: How can I order genuine Scania parts in Perth?

Simply visit our website or call us on 0423 858 801. Our parts team will help identify the exact Scania part you need. We then source it from Scania Australia and deliver it to you. We also offer an online ordering option for convenience.

Q5: Can you install parts on-site in the field?

Yes. Our Scania parts mobile service means our technicians come to you anywhere in Perth or the Pilbara. They carry common spares and the tools to install them, so your truck gets back on the road without the hassle of towing.

Q6: What is a core-exchange, and how do I save money?

Many expensive components (like turbochargers, alternators, etc.) can be ordered on a core-exchange basis. You pay most of the price now and return the old part (core) for credit. Once we receive and rebuild that core, you get up to 30% back. It’s a great way to get OEM parts at reduced cost while recycling your old units.